EASUN POWER IP65 Solar Inverter 6KW 450Vdc PV 100A MPPT Parallel Inverter 230V 48V Pure Sine Wave Hybrid Inverter Battery Charger
· Efficiently work with or without battery
· MPPT Solar Charge Controller up to 6000W solar panel
· Built - in Wifi for mobile monitoring (Requires APP)
· Compatible with (Li-ion,LiFePo4 and etc.) batteries
· Battery Equalization
Features:
- Sectional charging and discharging function available, able to enable and disable AC charging function based on the charging section time be set, switch power supply mode between inverter and AC bypass based on the discharge section time be set.
- Anti-counter-current grid-connected function (PV and mains hybrid power supply).
- It has insulation impedance and leakage current detection function.
- Support for use under battery-free conditions.
- It has double activation function of lithium battery, which can be triggered by connecting any mains/PV power.
- With the function of ECO mode and reducing no-load loss.
- There are 4 charging modes available: solar only, Mains Power first, solar first and hybrid charging.
- It has two output modes: Mains Power bypass and inverter output, and has the function of uninterrupted power supply.
- It has multiple protection functions for 360° omni-directional protection.
- Support lead-acid battery and lithium battery access.
- The ON/OFF switch controls the inverter AC output.
- PV Grid-connected power generation mode can be set.
- Adopt full digital voltage and current double closed-loop control, state-of-art SPWM technology and output pure sine wave.
- Advanced MPPT technology, the efficiency is as high as 99.9%.
- LCD screen design, 3 LED indicator lights, dynamic display system data and running status.
- Adopt intelligent adjustable speed fan to dissipate heat efficiently and prolong the service life of the system.
- Complete short circuit protection, over-voltage and under-voltage protection, overload protection and backfeed protection available.
|
Model
|
IGrid-SX-WP-6KW-Wifi
|
|
Battery Input
|
|
Battery type
|
Lead-acid / Li-ion / User Defined
|
|
Rated Battery Input Voltage
|
48V ( Minimum Startup Voltage 44V)
|
|
Hybrid Charging Maximum
Charging Current
|
100A
|
|
Battery Voltage Range
|
40Vdc~60Vdc ± 0.6Vdc(Undervoltage Warning/Shutdown Voltage/
Overvoltage Warning/Overvoltage Recovery...)
|
|
Solar Input
|
|
Maximum PV Open-circuit Voltage
|
500Vdc
|
|
PV Working Voltage Range
|
120-500Vdc
|
|
MPPT Voltage Range
|
120-450Vdc
|
|
Maximum PV Input Current
|
22A
|
|
Maximum PV Input Power
|
6600W
|
|
Maximum PV Charging Current
|
100A
|
|
AC Input（generator/grid）
|
|
Mains Maximum Charging Current
|
60A
|
|
Rated Input Voltage
|
220/230Vac
|
|
Input Voltage Range
|
UPS Mains Mode：(170Vac~280Vac)土2%
APL Generator Mode：(90Vac~280Vac)±2%
|
|
Frequency
|
50Hz/ 60Hz (Automatic Detection)
|
|
Mains Charging Efficiency
|
>95%
|
|
Switch Time (bypass and inverter)
|
10ms(Typical Value)
|
|
Maximum Bypass Overload Current
|
40A
|
|
AC Output（Backup power）
|
|
Output Voltage Waveform
|
Pure Sine Wave
|
|
Rated Output Voltage (Vac)
|
230Vac
|
|
Rated Output Power (VA)
|
6000
|
|
Rated Output Power(W)
|
6000
|
|
Peak Power
|
12000VA
|
|
On-load Motor Capacity
|
4HP
|
|
Output Frequency Range(Hz)
|
50Hz±0.3Hz/60Hz±0.3Hz
|
|
Maximum Efficiency
|
>90%
|
|
No-load Loss
|
No Energy-saving Mode: ≤50W Energy-saving Mode：≤25W (Manual Setup）
|
|
General
|
|
Certificate
|
CE(IEC62109-1)
|
|
EMC Certification Level
|
EN61000
|
|
Working Temperature Range
|
-25°C ~ 55°C
|
|
Storage Temperature Range
|
-25°C ~ 60°C
|
|
Humidity Range
|
0% to 100%
|
|
Waterpro of Gade
|
IP65
|
|
Dimensions
|
26mm*322mm*124mm
|
|
Weight (KG)
|
19.2
|
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
